|
This works well for (and is recommended for) THX and multi-channel video sources. This is quite a surprising and serious limitation. An example of this strange limitation is the analog input of the "AUX2" input also happens to be used as the Left and Right input channels for the 7.1 input. Because there are only 8 input settings, I had to assign the "AUX1" (front) input to the digital audio and video inputs from my AppleTV. Friends could not believe the sound in our fairly large family room was from 2-speakers only. As a 7.1 channel amplifier, there are 7 x 125watt channels available, native decoding of the latest lossless HD digital audio on BluRay (DTS-HD and Dolby TrueHD), Audyssey microphone and room equilazation, and THX Select 2 certification.
By default, it is set to "mix".all bass output is diverted to the subwoofer at an assignable crossover frequency. The on-screen receiver setup lets you assign specific HDMI, component, and digital audio for your 8 choices. On paper, the Marantz SR8002 offers more connectors and options than you would ever need. Not only does this not make sense, it is not documented anywhere in the manual.There are other annoyances:- FM / AM radio reception is below average. I chose the latter, as my KEF Reference speakers support bi-amplified wiring, providing 250 watts per channel into Left and Right channels. After 9 years, it was time to upgrade my former top-of-the-line Sony ES receiver (STR-DA 777ES) to take advantage of improved audio and high-definition video switching. So, while you might think that the volume indicator would indicate the volume level it doesn't. In this setup, the SR8002 gives you the option of taking the two unused channels and configuring them for a second amplified room/zone, or bi-amplification of your front speakers.
Setting the subwoofer to "BOTH" properly sends full-range audio to the front speakers. I had to reconfigure my setup to reassign the "AUX2" input to the digital CD input, which I also connected to the 5.1 (SACD) output from my CD player. (The AM/FM tuner is another, nonassignable input, as is the optional XM radio input). You have 4 HDMI 1.3 connections + 2 HDMI 1.3 outputs (good)., 4 component HD connections + 2 component HD outputs (good)., 4 TOSlink digital audio (including front), 3 coax digital audio, and a plethora of S-video, composite video, and analog audio inputs. Quite simply, the audio performance of the SR8002 is "7-star" on a 5-star scale.My second priority was in upgrading to a receiver capable of decoding the high-resolution audio of BluRay, while providing high definition video switching (via HDMI and component). This means that even if you could connect to all of the analog + digital inputs available you can only use 8 of them. Compared with my 1999 Sony ES receiver using the same antenna configuration I can only tune half of the stations.
The SR8002 also provides a toroidal power transformer for extra headroom when needed, and in my setup the audio performance is dramatic.I chose not to expand my current 5.1 speaker configuration to 7.1 channel. But in reality, there are serious limitations.First of all, it is inexcusable for a receiver of this cost to be missing a phonograph input. I spent about 3 hours trying to figure out why my new (required) phonograph preamp sounded so terrible before I discovered this problem. This means that the front AUX1 inputs are completely unusable, since all 8 inputs were assigned from rear input sources.Another big surprise was the subwoofer speaker setting. But strangely in "mix" setting, the SR8002 does NOT output the bass to the subwoofer for two-channel analog inputs AND it does not output the low frequencies to the front speakers. Yes, for $50 you can buy a phono preamp that gives you good performance and doesn't have the A/C hum of your $25 Radio Shack unit. In this respect the receiver delivers, but with some surprising limitations. The bright blue indicators are always at 12-o clock position.
But you cannot use a single digital input for more than one setting. For the ultimate audio experience, the Marantz SR8002 offers two "Pure Direct" modes - the first one bypasses the equalization and surround circuits, the second mode completely disables all video and display logic for even shorter audio output path. My CLOCK RADIO gets much better radio reception than this $2000 receiver.- the front of the receiver has two large controls for Source and Volume - each one has a bright blue LED indicator that does NOT move with the control. Each input can also be renamed. However, several surprising configuration limitations keep me from giving it a full-on 5-star review.Let me preface my review by stating that my home theater / audio configuration is on the higher-end of the scale: 3 KEF Reference speakers for the front 3 channels, Boston Acoustics rear surrounds and subwoofer, Sony ES SACD player (and yes, I have an SACD collection)., Bang & Olfusen turntable, Sony reference DVD player, AppleTV, Roku music server, JVC SVHS VCR, Mitsubishi HDTV monitor.My first priority was in upgrading the audio quality, and I must say that in this respect, the Marantz SR8002 far exceeded my expectations. AND, it enables the subwoofer for the simulated modes such as NEO6.
And you cannot reassign the analog video (S-Video/Composite) or analog audio inputs. I was looking forward to trying the "HD radio" capability, but the tuner reception is so bad that it can never get a strong enough signal to use any of the HD radio broadcasts in my area. After reading all the professional reviews, I settled on the Marantz SR8002. Even my Sony ES from 1999 had 12 discrete inputs.
Three weeks after an extensive configuration and testing, I must say that I am pleased overall with my choice. But, come on.Secondly, and more discouraging, despite the plethora of connections you only have 8 discrete settings that can be assigned. Let me tell you - the pure stereo performance in this configuration will blow your socks off. And, the multi-channel modes (especially NEO6: Music) are quite outstanding even with a 2-channel source.
And the front input control does not have a positive feedback to let you know you have switched inputs.- the remote control button/display backlight is ONLY activated when you press one of the two buttons on the bottom of the remote- the remote does not offer discrete settings for all surround modes or settings (although thankfully there are discrete power on/off codes)- the onscreen display is very primitive (think 1982 Apple ][+ 40x24 characters)In summary, despite the outstanding audio performance of the Marantz SR8002 (once you figure out the subwoofer and other settings)., I cannot give this a full 5-star rating because of the serious limitations and limited inputs.
very good noise with radio station on not very clear.send my back get refund junk.tohigh pricecost 599.99 thisreceive.my sr8400 sound better high price model.beware the sr8002 model donot buy junk.better model outthere thisthingsaveyou money.bad review this model.it bug in it.
They are set by Marantz who uses 80 Hz as the criterion for determining Large and Small. Audyssey recommends setting speakers to Small manually2) The 9 dB cut in the subwoofer level (not LFE as Mr. Fichtner states) was due to a Marantz firmware problem unrelated to Audyssey. Mr. Fichtner has made some inaccurate statements about Audyssey in the Marantz, that I need to clarify to prevent customers from getting the wrong impression.1) Large and Small settings for speakers are not set by Audyssey. It has been fixed in current products and Marantz dealers can update any unit that was purchased earlier.Chris KyriakakisAudyssey Founder and CTO
I really like the sound we're getting from the different settings for regular TV viewing, too. You can also change the digital names on the different inputs. I bought this Marantz to take advantage of HD audio codecs from Bluray. I heard that as of mid-April 2008, a new firmware upgrade is available from Marantz to fix this, but you have to ship it to a service center to get the upgrade if your unit is older. I'll have to change one to "PS3" some day.This receiver is very musical, and it is possible to bi-amp 6 or 8 ohm speakers for sure, using additional speaker outs and a switch on the back of the unit. Other non-HDMI or analogue sources speed right along. One is the main remote, which has a backlight, and can be used to "learn" other remotes from the rest of your entertainment center, or key codes can be entered from a list in the back of the manual. It took me a good 10 minutes to figure out how to assign the HDMI port to the proper input (I used TV) but once I did, everything was just fine.
You have to ship your unit away to Marantz. There are gold-plated RCA outs all through the rear, but I was disappointed there are no banana-plug posts for speakers (you have to hand-screw them). This receiver is full 1080p, and will pass the "deep color" which makes it somewhat future-proof. I am really enjoying this receiver, and I feel it was a good investment. There are work-arounds to this annoying bug, although they are somewhat tedious. this thing costs a lot. The output to the sub all but disappears, unless I raise the sub output level to dangerous levels, and crank up my sub.
This model is effected, so if you plan on bitstreaming DTS-MA to the Marantz SR-8002, you will experience the loud pops on discs like The Golden Compass. I purchased my Marantz SR8002 and thought I'd offer my review because Amazon had none. That's a plus. The sound of this box really is nice.
First of all, it looks great. Very, very inconvenient. It sounds quite excellent. I seem to lose my subwoofer almost entirely after running in Audyssey EQ mode. Unfortunately for Marantz, they do not offer consumer-upgradable firmware fixes by internet. My manual, by the way, has about 6 or 8 languages in it -- it's as thick as a book. I was scared of the extreme heat/fire stories from some of the higher-end Onkyo models. It looks and sounds great.
When those EQ and distance numbers are put into that mode, everything sounded just great.A side note -- many people don't bother with Audyssey or EQ anyway, so you might not even care about all of this. Yeah, it's pretty horrible, but you can thank copy-protection for that. You can learn a lot more about this on the [.].The Audyssey EQ feature provides a mic which is used to sample 6 or so listening areas to calculate your EQ settings for you. The "bug" causes the sub channel to lose a great deal of power after you use it, and sometimes settings numbers get screwed-up after you change from Large to Small speakers (another Audyssey bug is that it automatically resets all speakers to Large). The Marantz fix of "just adding 9db" to the sub wasn't enough.
In the end, I tried copying down (channel by channel) all of the EQ and distance settings that Audyssey made, and saved those into the Preset EQ mode. Come on. If you are using LPCM then you will not experience this bug -- only happens over bitstreaming.I've talked about a lot of negatives here, but don't get me wrong -- everything else works like it should, and sounds crystal-clear. Another nice, but buggy feature, is the Audyssey EQ system. It's really scary, and my sub would almost explode in overdrive if I changed to another output on the receiver, so I decided to forget about Audyssey for a bit. My previous receiver was an Onkyo TXDS-575, and it had a ground-loop hiss which angered me 8 years ago when I bought it -- so in short, I decided to go with another brand this time around.Now back to the Marantz. No matter what I did, or what speaker setting I used (either large or small) to set my Audyssey settings, the sub just wasn't even close to correct. My PS3 already decodes these codecs and sends them LPCM via HDMI cable, so the receiver only had to interpret the LCPM.
The second is an additional remote which has average bells/whistles, but can be used in a 2nd or 3rd room. Lastly, another bug that has surfaced is the "DTS-MA Bomb" that affects all manufacturers who used a certain Texas Instruments chip for processing. It's a heavy 38 pounds, and comes double-boxed and well-packed. Bi-amping did improve my Paradigm Monitor 7 speakers slightly. Audio starts quickly, but the changed video source can take up to 10 seconds or even a bit longer to show up. I originally planned on going with Onkyo, but those are really expensive in Korea, and horror stories about some Onkyo models and "lip-flap" issues over HDMI scared me away from those this time around.
I've never needed them.The annoying thing about HDMI on any unit, and this one is no exception, is that "handshaking" when you change HDMI sources takes 3 to 10 seconds. There is a known LFE bug (Low Frequency Extention) with the earlier versions of this unit. Even still, this Marantz unit has some adjustments on their menu should there ever be any problem. Mine is the 220v Korean version with no satellite radio available here, but everything else is the same. I am pleased to announce that there is no "lip-flap" whatsoever, like the Onkyo's are having big problems with. My color is gold, and it's gorgeous.I have owned my unit for 4 days.
It doesn't say you cannot bi-amp 4 ohm speakers, but does only mention 6 or 8 ohm in the manual. we should at least get those.This unit runs warm, but not hot. You get 2 remote controls with this unit. I only give it 4 stars because of the Audyssey bug and somewhat slow HDMI switching, otherwise, it would be 5 stars.
|
